Filter
Top Products
Useful functions
6
109
Viewing a picture immediately after shooting (Rec View)
You can view the picture you have just taken on the monitor for 3 seconds
while it is being recorded.
1
Display the top menu in the shooting
mode.
• Open the lens barrier fully.
•Press .
2
Press to select MODE MENU.
3
Press to select the SETUP tab, then press .
4
Press to select REC VIEW,
then press .
5
Press to select ON, then
press .
Rec View is set.
To close the menu, press again.
Rec View settings
ON : The picture being recorded is displayed on the monitor. This is useful for a
brief check of the picture you have just taken. Pressing the shutter button
halfway during Rec View lets you resume shooting immediately.
OFF : The picture just taken is not displayed. This is useful when you want to
prepare for your next shot while the previous picture is being recorded.
• The Rec View setting remains even when the lens barrier is closed.
• During sequential shooting, Rec View is disabled.
CARD
SEtUP
CAM
PIC
ALL RESEt
REC VIEW
FILE NAME
PIXEL MAPPING
CARD
SEtUP
CAM
PIC
ALL RESEt
REC VIEW
FILE NAME
PIXEL MAPPING
ON
OFF