Olympus C-300 ZOOM Digital Camera User Manual


 
Adjusting the color tone (White balance)
Adjusting the image quality and exposure
4
78
5
Press to select one of the
white balance modes: AUTO, ,
, or , then press .
The white balance is set.
To close the menu, press again.
6
Take the picture.
The white balance setting returns to AUTO (factory default setting)
when the lens barrier is closed. “Saving the settings (All Reset)”
( p.110)
If you want a color tone that resembles what you see under tungsten
lighting, set the white balance mode to .
White balance may not be effective under some special light sources.
After setting a white balance mode other than AUTO, play back the
picture and check the colors on the monitor.
When the flash is fired with a white balance setting other than AUTO,
colors may appear different in the resulting picture from the colors
you see on the monitor.
CARDSEt
CAM
PICtURE
AUtO
WB