Filter
Top Products
Troubleshooting
Troubleshooting
8
133
The picture has obscured edge(s).
Possible cause Corrective action Ref. Page
The lens was partly
blocked by a finger or
the strap.
Hold the camera correctly, keeping your fingers
and the strap away from the lens.
p.36
The subject was too
close.
Check the actual picture area by using the
monitor to take the picture.
p.41
The lens was dirty. Clean the lens. Remove dust with a
commercially available lens blower and wipe
gently with a commercially available lens
cleaner. If the lens is left dirty, mold may form.
–
The picture is out of focus.
Possible cause Corrective action Ref. Page
The camera moved
when the shutter button
was pressed.
Hold the camera correctly and press the shutter
button gently.
p.36
The subject was too
close.
Position the camera more than 0.2 m/0.7 ft from
the subject and take the picture.
p.57
The flash was set to the
flash off mode in a
lighting condition
requiring use of the
flash.
Camera movement occurs easily with slower
shutter speeds. Use a tripod, or hold the camera
firmly.
p.59