Filter
Top Products
154
E
TROUBLESHOOTING
Operating Problems
The camera does not work.
1 The power is OFF.
[ Open the lens barrier to turn on the power. (P. 56)
2 The batteries are loaded incorrectly.
[ Reload the batteries correctly. (P. 48)
3 The batteries are exhausted.
[ Replace the batteries with new ones. (P. 48)
4 The batteries are temporarily unable to function.
[ Keep the batteries warm while using the camera.
No picture is taken when the Shutter release button is
pressed.
1 The flash has not finished charging or the previous picture
is being written into the SmartMedia.
[ Remove your finger from the Shutter release button
and wait until the Condition indicator LED stops blinking.
(P. 74)
2 SmartMedia is full.
[ Replace the SmartMedia, erase unwanted pictures, or
transfer the entire picture data to a PC and erase the
data. (P. 122/124)
3 No SmartMedia is in the camera or it is protected.
[ Use a new SmartMedia.
The flash does not fire.
1 The flash mode is in the Off mode.
[ Set the flash mode to something other than the Off
mode. (P. 88)