Filter
Top Products
160
E
The picture is too dark.
1 The flash was blocked by a finger.
[ Hold the camera correctly, keeping your fingers away
from the flash. (P. 70)
2 The subject was out of the working range of the flash.
[ Shoot within the flash working range. (P. 90)
3 The flash mode was set to the Off mode.
[ Check the flash mode before shooting. (P. 88)
4 The subject was too small and was backlit.
[ Set the flash to Fill-In mode. (P. 96)
The picture is too bright.
1 The flash was set to the Fill-In Flash mode.
[ Set the flash mode to one other than Fill-In Flash. (P.
88)
2 The subject was very bright.
[ Either adjust the exposure -1 or point the camera
away from overly bright subjects. (P. 84)
The colors of pictures taken indoors look unnatural.
1 The lighting fixture(s) affected the picture.
[ Set the flash mode to Fill-In. (P. 96)
The picture has obscured edge(s).
1 The lens was partly blocked by a finger or the strap.
[ Hold the camera correctly, keeping your fingers and
the strap away from the lens. (P. 70)
2 The shooting distance was too close.
[ Use the close-up compensation marks in the
viewfinder. (P. 106)