Filter
Top Products
11
Getting started
Loading the batteries
This camera uses a CR-V3 lithium battery pack or two AA (R6) NiMH
batteries, NiCd batteries, alkaline batteries or lithium batteries.
1
Make sure that:
2
Slide the battery compartment
cover in the direction of (the
direction indicated by the
mark on the cover), and lift it up in
the direction of .
3
Insert the batteries, making sure
that they are correctly oriented as shown in the illustration.
4
Close the battery compartment cover in the
direction of . While pressing the
mark, slide the cover in the direction of
.
If the battery compartment cover will not close
easily, do not force it. Try pressing the mark
with both hands.
If the camera is left for about 1 hour with the batteries removed, the
date and time settings will revert to the factory default settings.
The lens barrier
is closed.
The lamp on the right
of the viewfinder is off.
The monitor is off.
Battery
insertion
direction
mark
When using
a lithium
battery pack
When using
AA (R6)
batteries