Filter
Top Products
17
EN
Preparations for shooting
Basic guide
250
250
F5.6
F5.6
250 F5.6
38
38
L
N
N
u button
Horizontal grip Vertical grip
Keep your fingers and the
strap away from the lens,
flash, and the white
balance sensor.
Taking a picture
while viewing the
monitor
It is possible to use the LCD monitor as a
viewfinder and check the subject’s composition,
or shoot while viewing an enlarged display on
the LCD monitor. g“Using live view” (P. 31)
1 Press the u (live
view) button
If no operations are performed for approximately 8 seconds while the camera is
on, the monitor backlight turns off to save battery power (when the super control
panel is lit). If no operations are performed for approximately one minute
thereafter, the camera enters the sleep mode (stand-by) and stops operating. The
camera activates again when you touch any button (the shutter button, arrow pad,
etc.). g“BACKLIT LCD (Backlight timer)” (P. 95), “SLEEP” (P. 94)
• The subject is displayed on the
LCD monitor.
2 Press the shutter button
all the way down
• The picture is taken with the focus
adjusted.
Shutter button
Holding the camera
When the camera stops operating
s0011_e_00_0_unified.book Page 17 Wednesday, September 12, 2007 4:46 PM