Filter
Top Products
48
EN
3
Exposure
The camera automatically shoots a number of pictures at different exposure values for each
frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit
subject or a scene at dusk), you can pick the picture you prefer from a selected number of
frames with a variety of different exposure settings (exposure and compensation values). The
pictures are taken in the following order: Picture with optimum exposure, picture adjusted in –
direction, and picture adjusted in + direction.
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed. g“EV STEP” (P. 96)
Number of frames: 3 or 5
Setting display
Start shooting.
• In single-frame shooting, the exposure changes every time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until the selected number of frames are
taken.
• Releasing the shutter button stops auto bracketing shooting. When it stops, 0 blinks in
the viewfinder and on the control panel and 0 is displayed in green on the super
control panel.
AE bracketing
Direct button MODE + AFj/k
Menu MENU[X][AE BKT]
Viewfinder Control panel
e.g.) When BKT is set to [3F 1.0EV]
-1.0EV +1.0EV±0
Number of
frames
EV step
Bracketing
Number of
frames
EV step
Compensation range
• The exposure value for the next shot is displayed
during shooting.
s0011_e_00_0_unified.book Page 48 Wednesday, September 12, 2007 4:46 PM