Filter
Top Products
57
EN
4
Focusing and shooting functions
Setting method
Setting display
This function lets you take pictures using the self-timer. You can set the camera to release
the shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer
shooting.
For the setting method, see “Sequential shooting” (gP. 56).
Press the shutter button all the way.
• A picture is taken.
• When Y12s is selected:
First, the self-timer lamp lights up for approximately
10 seconds, then it blinks for approximately 2
seconds and the picture is taken.
• When Y2s is selected :
The self-timer lamp blinks for approximately 2
seconds, and then the picture is taken.
• To cancel the activated self-timer, press the </Y/j
button.
Direct button </Y/j + k
Super control panel ip: [</Y/j]
Viewfinder Control panel
Sequential shooting H :
Sequential shooting L :
12-second self-timer :
2-second self-timer :
Remote control :
2-second remote control :
• Anti-shock display:
A blinking display in the viewfinder or on the control panel and the D symbol on the
super control panel indicates that anti-shock is activated.
Self-timer shooting
k
</Y/j button
Single-frame shooting
Self-timer lamp
s0011_e_00_0_unified.book Page 57 Wednesday, September 12, 2007 4:46 PM