Filter
Top Products
55
EN
4
Focusing and shooting functions
Registering an AF target mode
You can register a frequently used AF target mode and the position of that AF target. You can
then quickly load that registered setting (“home position”) and use it when shooting.
Registering
1 In the screen of Step 2 of “Selecting the AF
target position” (gP. 54), press the < button
and F button at the same time.
• The home position is registered at the time the buttons
are pressed.
• The home position cannot be registered when
operated from a menu.
Shooting
To use this function, you must assign the [P HOME] function to the < button in advance.
g“; FUNCTION” (P. 92)
1 Press the < button.
• The registered home position is selected. Press this button again to switch to the original AF
target mode.
x Notes
• The AF sensitivity is not recorded when registering the home position.
The camera’s auto focus may not be able to focus on the subject in situations such as when
the subject is not in the center of the frame. If this happens, the easiest solution is to use
focus lock. Use this when composing the subject outside of the 11 AF targets or when the
subject is difficult to focus on.
1 Adjust the AF target with the subject to
be focused and press the shutter button
halfway until the AF confirmation mark
lights up.
• The focus is locked. The AF confirmation
mark and the AF target in focus light up in the
viewfinder.
• If the AF confirmation mark blinks, press the
shutter button halfway again.
• While the shutter button is being pressed, the
super control panel disappears.
Focus lock k If correct focus cannot be obtained
HP
SELECT
AF AREA
Indicates that the AF target
is being registered.
Card access
lamp
Shutter button
s0011_e_00_0_unified.book Page 55 Wednesday, September 12, 2007 4:46 PM