Filter
Top Products
109
Chapter 9
Troubleshooting
POSSIBLE CAUSES CORRECTIVE ACTION
REF. PAGE
No picture is taken when the shutter button is pressed.
1 The lens barrier is
closed.
2 The memory gauge is
full.
3 The flash has not
finished charging.
4 The orange lamp blinks
after you take a picture.
5 The card is full.
6 The battery has run out
of power.
7 The monitor indications
disappear, or the
battery check appears.
1 Open the lens barrier.
2 Wait until there is room in
the memory gauge.
3 Remove your finger from the
shutter button and wait until
the orange lamp stops
blinking. Take your shot
again.
4 The flash is charging. Shoot
again when the orange lamp
stops blinking.
5 Insert a new card or erase
unwanted pictures. Before
erasing, download important
images to a computer. If the
green lamp is blinking, wait
until it stops.
6 Replace the battery with a
charged one.
7 Replace the battery with a
charged one. (Do not open
the battery/card
compartment cover when
the card access lamp is
blinking.)
P. 20
P. 13
P. 50
P. 35
P. 17, 88
P. 17
P. 17