Filter
Top Products
1
Make sure that the TV and camera power are off .
2
Connect the camera’s VIDEO OUT jack to the TV using the video
cable.
3
Press to turn on the camera.Turn on the TV. Set the TV to the
video input mode.
● For details on switching to video input, refer to your TV’s instruction
manual.
4
Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
92
Chapter 6
Use the provided video cable to play back recorded images on your TV.
Connect to the TV’s video
input (yellow) terminal.
Video cable
Connect to the VIDEO OUT jack.
Playback on a TV
● Make sure that the camera’s video output signal type is the same as the
TV’s video signal type. (P. 101)
● The camera’s monitor turns off automatically when the camera is connected
to a TV.
● The image may appear off-center on the TV screen. This is due to the TV's
adjustment settings.
● When images are compressed in order to fit the entire image on a TV
screen, a black frame is placed in the blank parts of the screen around the
image. If the image is output to a video printer via the TV, the black frame
may be printed.
Note