Filter
Top Products
21
Chapter 1
Power on/off
When the power is turned on, the camera checks the card automatically.
Indications TIPS
There is no card in the camera or the card
is not locked into place.
T Insert a card. If a card is already inserted,
remove it and insert it again.
There is a problem with the card.
T Format the card, if this does not correct
the problem use a different card.
The card cannot be recognized with this
camera system.
T Format the card.
● Formatting erases all data saved on the
card.
1 Press ñ to select FORMAT, then
press .
● The FORMAT screen appears.
2 Press Ñ to select YES, then press
to start formatting.
● When formatting is complete, the
camera is ready for shooting.
FORMAT
YES
NONO
CAUTION ERASING ALL
Card check