Filter
Top Products
149
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
d Blink Warning
Set whether or not to detect human subjects with eyes closed when shooting
pictures using face priority (A123) in any mode other than a smile timer/y blink
proof (A54).
B Notes on Blink Warning
• The camera does not perform blink warning in the following cases.
-When a (smile timer) (A54) is used
-When Continuous, BSS, Multi-shot 16 or Intvl timer shooting is selected for Continuous
- When focus mode is set to p (macro close-up)
• When y (blink proof) is used for shooting, the setting for Blink warning is ignored and whenever
smiling faces are detected, the camera takes two pictures and chooses an image in which the
subjects’ eyes are open.
Press the d button M z (Setup menu) (A135) MBlink warning
On (default setting)
When the camera detects that one or more human subjects have closed their eyes
shortly after recognizing the faces and shooting them, the Did someone blink?
screen will appear on the monitor.
The face of the human subject that may have closed his/her eyes is framed by a
yellow border. You can check the picture taken and determine if you need to take
the picture again.
See “Operating the Did someone blink? Screen” (A150) for more information.
Off
Blink warning doesn’t take effect.