Filter
Top Products
73
More on Playback
Taking a Closer Look: Playback Zoom
Rotating the zoom control to
g
(
i
) during full-frame playback
mode (
A
30) zooms in on the current picture, enlarging and
displaying the center of the picture on the monitor.
•
The guide at lower right shows which portion is enlarged.
The following operations can be performed while
pictures are zoomed in.
Pictures Taken Using the Face-Priority Function
When zooming in (playback zoom) on a picture taken
using the face-priority function (A123), the picture will
be enlarged with the face detected during shooting at
the center of the monitor.
• If more than one face was detected, the picture will
be enlarged with the face on which focus was
acquired at the center of the monitor. Press the multi
selector H, I, J, or K to display other faces that were detected.
• When the zoom control is further rotated towards the g (i) or f (h) direction,
the zoom ratio will change and will become a normal playback zoom display.
To Use
Description
A
Zoom in
g (i)
Zoom increases each time the zoom control is
rotated to
g
(
i
), up to about 10×. Zoom also
increases by rotating the command dial to the right.
-
Zoom out
f (
h)
Rotate the zoom control to
f
(
h
). When the
magnification ratio reaches 1×, the display
returns to full-frame playback mode.
Zoom also decreases by rotating the
command dial to the left.
-
Move the display area
Press the multi selector H, I, J or K to move
the display area to other areas of the picture.
12
Return to full-frame
playback
k
Press the k button. 30
Crop picture
d
Press to crop the current picture to contain
only the portion visible in the monitor.
77
Switch to shooting
mode
c
Press the c button or the shutter-release
button to change back to the last chosen
shooting mode.
30
3
3.0
3.0
2
2
.
.
0
0
2.0