Filter
Top Products
52
Shooting Suited for the Scenes
Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector)
By simply framing a picture, the camera automatically selects the optimum scene
mode for simpler shooting. When the camera is aimed at a subject in x scene auto
selector mode, the camera automatically selects one of the following scene modes.
1
Rotate the mode dial to x.
• If the built-in flash is not raised, the
message The flash is lowered. will be
displayed.
• Press the m (flash pop-up) button to raise
the built-in flash.
2
Frame the subject and take the picture.
• When the camera automatically selects a scene mode,
the shooting mode icon changes to that for the scene
mode currently enabled.
• Press the shutter-release button halfway to set focus and exposure. When the subject
is in focus, the focus area (active focus area) glows green.
• Press the shutter-release button the rest of the way down to take the picture.
• The Did someone blink? screen may be displayed when the Blink warning option
(A149) in the setup menu is set to On (default setting). Press the k button or the
shutter-release button to return to the shooting screen. See “Operating the Did
someone blink? Screen” (A150) for more information.
• Auto mode • Portrait (A40)
• Landscape (A41) • Night portrait (A42)
• Night landscape (A44) • Close-up (A44)
• Backlight (A46)
d: Auto mode g: Night landscape
e: Portrait i: Close-up
f: Landscape j: Backlight
h: Night portrait
1/125
1/125
F2.8
F2.8
1/125
16
16
F2.8
16
1/125
1/125
F2.8
F2.8
1/125 F2.8
16
16
1616