Filter
Top Products
Preparation
27
Using the LCD
1
Set the POWER/Mode selector switch to
ON. (Page 25)
2
Hold down the OPEN button and open the
LCD monitor.
It can open out to 90°. Do not try to open it
further as this will damage the camera.
OPEN button
90°
3
Position the LCD monitor where it is easiest
to see.
The monitor can be rotated 180° toward
the lens and 90° toward you.
180° 90°
Do not apply unnecessary force to the
open LCD. This can damage the camera.
Ensure the LCD is fully closed.
•
•
•
•
Emphasizing outlines
Emphasizing the outlines of the images you see
in the viewfinder or on the LCD makes it easier
to focus.
Emphasizing the outlines does not effect the
images you shoot.
1
In CAMERA mode, press the EVF DTL
button.
“EVF DTL ON” appears on the screen for
about 2 seconds.
BARS SHUTTER
AUDIO
SPEED
INPUT
MIC POWER +48V
（R）
1 2
SEL
WFMRESET
COUNTER
EVF DTL
MIX
ZEBRA
SELECT
CH 2
INT ON
OFF
INPUT 2
（L）INT
INPUT 1
INPUT 2
CH 1
EVF DTL button
Press the EVF DTL button again to return to
the original display. “EVF DTL OFF” appears
on the screen for about 2 seconds.