Filter
Top Products
Playback
65
Frame-by-frame playback
1
Tilt the Operation lever in the direction
during playback to pause the clip.
2
Press the AUDIO MON/ADV buttons.
EXECMENU
AUDIO MON/ADV
PUSH
ENTER
AUDIO MON/ADV +/– buttons
When the + button is pressed, the images are
advanced in the forward direction, and when the
- button is pressed, they are advanced in the
reverse direction at half-second intervals.
To return to normal playback, tilt the Operation
lever in the direction (play).
Adjust volume
The volume of audio output from the internal
speaker and headphone jack can be adjusted
with the AUDIO MON/ADV buttons during
playback.
EXECMENU
AUDIO MON/ADV
PUSH
ENTER
AUDIO MON/ADV +/– buttons
Viewing images on a monitor or television
You can view the images on a monitor or
television if you connect the unit using HD
SDI cables (not included) or HDMI cable (not
included).
1
Connect the camera to the monitor or TV
set. (Page 67)
2
Start playback.
To show the information that appears on
the viewfinder and the LCD monitor on
the monitor or television, select ON in the
OUTPUT OSD item on the setup menu
DISPLAY SETUP screen. (Page 81)
Checking the date and time
To show the date and time of shooting on the
viewfinder and the LCD monitor, select the item
to be displayed with the DATE/TIME item on the
setup menu DISPLAY SETUP screen. (Page 81)
TIME: To display the time
DATE: To display the date
TIME & DATE: To display the time and date
OFF: No display
•