Filter
Top Products
Displays
69
6 Information display
The following information is displayed
depending on the situation.
Warning (Page 71)
Performance of the auto white balance or
the auto black balance
Switch position
7
Shutter speed
display
The shutter speed is displayed here.
8 Microphone level automatic control
display
Appears when the MIC ALC item on the setup
menu RECORDING SETUP screen is set to
ON.
9 Frame rate display
Displays recording frame rate.
When SYSTEM FREQ is set to 59.9 Hz,
1080/60i is not displayed.
When SYSTEM FREQ is set to 50 Hz,
1080/50i is not displayed.
10 Audio level meter display (Page 49)
Displayed when the LEVEL METER item on
the setup menu DISPLAY SETUP screen is
set to ON.
11 Focus bar display
Displayed when the FOCUS BAR button is
pressed.
12 Safety zone
The range of the zone is displayed when
the SAFETY ZONE item on the setup menu
DISPLAY SETUP screen is set to ON. (Page
81)
This indicates the range (90 %) within which
signals can be displayed by an ordinary
home-use TV set.
13 3D guide display
Displays the shooting range of distance within
which the shot subject can be reproduced as
a comfortable 3D image.
Use this as a rough guide.
14 Iris display
Displays the F-value.
•
•
•
•
•
•
15 Convergence display
The distance of the reference plane for a 3D
image is displayed with C00 to C99.
The higher the number is, the greater the
distance is.
Use this as a rough guide.
16 Zoom position display
The zoom position is displayed with Z00
(maximum wide-angle) - Z99 (maximum
zoom).
17 Focus control information display
Displays the focus control information with
95 - 00.
In the manual focus mode, MF appears. MF
is not displayed when the PUSH AUTO button
is pressed and the auto focus mode is set,
When the display is set to macro control,
the black and white of MF are displayed in
reverse.
95 (Focal distance: infinity)
:
00 (Focal distance: approx. 5 cm)
Depending on the zoom position, the macro
range may not be enabled.
Also, depending on the zoom position, the
lower limit value of the macro range may be
different.
18 Date and time display
Month:
JAN (January), FEB (February),
MAR (March), APR (April), MAY (May),
JUN (June), JUL (July), AUG (August),
SEP (September), OCT (October),
NOV (November), DEC (December)
mmm dd yyyy hh:mm:ss
Day of the month
Year:
2001 - 2039
Hours
Minutes
Seconds
19 Shot mark recording display
(SHOT MARK)
Displayed when a USER button to which the
SHOT MARK function has previously been
allocated is pressed during recording.
INVALID will be displayed if a shot mark
cannot be attached.
•
(Continued on the next page)