Filter
Top Products
68
Screen displays
Regular displays
TC 00 : 00 : 00 : 00
20min
PH
1080
P3. 2K
R-I MAGE
DEC 2 5 201 0 9 :56: 04
MARK ON
3D 1. 5-12m M F55
1/250
Z01F2. 0 C00
0
dB
PA USE
60
ALC
24P
VOLUME
[ + ]
_
[ ]
23
24
20
21
22
18
19
17
16
25
1514
9
11 12 13
10
8
7
6
5
4
3
1
2
1 Time code display
Each time you press the COUNTER button,
the display switches over to the following data
(or no indication).
COUNTER:
Counter value
CLIP:
CLIP counter value for respective clip
Displayed when the REC COUNTER item
on the settings menu DISPLAY SETUP
screen is set to CLIP.
During playback, the time code display
is automatically set to CLIP, and the time
code is counted from a value of 0:00:00
for each clip.
TC:
Time code value
When the time code value could not be
read correctly from the SD Memory Card,
[TC∗] is displayed.
UB:
User information
When user information could not be read
correctly from the SD Memory Card, [UB∗]
is displayed.
2 Media capacity display
Displays a rough guide of the remaining
recording capacity of the card in use.
Not displayed during PB mode.
�
3 Media information display
Displays basic information about inserted SD
Memory Cards.
: Recording possible with both right and
left cards
:
Right and/or left card is write-protected
: Recording not possible with right and/or
left card
: Right and/or left card is full
Recording may be possible in some
cases even when this icon is displayed.
Depending on the memory size and type
of SD Memory Card used, the icon may
not be displayed even when the card’s
memory becomes full during shooting
and shooting is stopped.
: Playback-only
SD Memory Cards already containing 200
or more clips may be used for playback
only.
: Accessing card
: No card inserted
4 Recording format display (Page 80)
5 System frequency display
60: 59.9 Hz 50: 50 Hz
�
�