Filter
Top Products
18
Description of parts (continued)
Remote control
To use the remote control, set the IR REMOTE item on the OTHER FUNCTIONS menu to ON. The default
setting for this item is OFF. (Page 98)
The following buttons are for functions that
cannot be executed on this camera-recorder.
PHOTO SHOT button •
button•
1 EXT. DISPLAY button (Page 70)
2 DATE/TIME button (Page 70)
3 START/STOP button
Same function as the START/STOP button on
the camera.
4 ZOOM/VOL buttons (Pages 34 and 70)
5 PLAY button (Page 59)
6 SEARCH buttons (Pages 59 and 69)
7 PAUSE button (Page 59)
8 STILL ADV buttons (Page 70)
9 STOP button (Page 59)
10 SKIP buttons (Pages 59 and 69)
11 OPERATION buttons
Same function as the Operation lever on the
camera.
12 MENU button
Same function as the MENU button on the camera.
ZOOM
START/
STOP
PHOTO
SHOT
EXT
DISPLAY
DATE/
TIME
VOL
PLAY
STOPSKIP SKIP
MENU
ENTER
PAU S E
SEARCH
STILL ADV STILL ADV
SEARCH
3
4
6
8
1
2
5
7
8
9
10
11
6
10
12
Remote control usable range (Page 22)
Recharging the battery
Recharging
The battery does not come ready charged when the camera is purchased. Charge the battery before use.
It is recommended that you keep one extra battery as a spare.
1
Connect the power cord to the AC adapter.
Disconnect the DC cord.
(Battery cannot be charged if DC cord is
connected.)
Insert until fully in place.
2
Insert the battery.
Charging lamp [CHARGE]
Align the battery with
the mark and insert fully.
Charging lamp
On: Charging in progress
Off: Charging complete
Flashing: See below
If charging lamp is flashing
Check that there is no dirt, dust, or other
substances attached to the connectors on the
battery or AC adapter, and ensure that the adapter
has been connected correctly.
If there is dirt or dust on the connectors,
disconnect the power plug from the socket before
cleaning.
If the charging lamp continues to flash, there
may be a fault with the battery or the AC adapter.
Please consult with the place of purchase.
■
■
•
•