Filter
Top Products
Displays
77
(Continued on the next page)
7 Information display
Following information is displayed depending
on the situation.
Performance of the auto white balance or the
auto black balance
Warning (Page 79)
The ND filter recommended under the
prevailing shooting conditions is displayed.
The AWB error message (LOW LIGHT /
LEVEL OVER) is displayed. Page 39
The functions allocated to the USER buttons
are displayed while you hold down the DISP/
MODE CHK button.
8 EXPANDED display
Displayed during the expanded display.
9 Microphone level automatic control display
Appears when in the setup menus,
RECORDING SETUP screen, MIC ALC, you
have selected “ON”.
10 Marker luminance display
When markers are displayed, the brightness
level around the center of the screen is
indicated as 0% to 99%. “99%↑” appears if the
percentage is over 99.
11 Timestamp display (Page 45)
12 Date and time display
Month:
JAN (January), FEB (February), MAR (March),
APR (April), MAY (May), JUN (June),
JUL (July), AUG (August), SEP (September),
OCT (October), NOV (November),
DEC (December)
mmm dd yyyy hh:mm:ss
Day of the month
Year:
2001 - 2039
Hours
Minutes
Seconds
13 Frame rate display
Displays recording frame rate.
Not displayed when set to 1080/50i.
14
Shutter speed
display
The shutter speed is displayed here.
•
•
•
•
•
15 Audio level meter display (Page 49)
16 Auto iris control display
STD: Standard auto-iris control
SPOT:
Auto iris control for spotlight
BACK
: Auto iris control for backlight
compensation
17 Iris display
Displays F value.
18 Zoom position display
The zoom poison is displayed with Z00
(maximum wide-angle) - Z99 (maximum zoom).
The unit can be switched to mm in the ZOOM
& FOCUS item of the setting menu DISPLAY
SETUP screen.
19 Focus control information display
Displays the focus control information with 99 - 00.
In the auto focus mode, AF appears. In the manual
focus mode, MF appears. When the display is set to
macro control, the black and white of AF or MF are
displayed in reverse.
95 (Focal distance: infinity)
:
00 (Focal distance: approx. 5 cm)
Depending on the zoom position, the macro
range may not be enabled.
Also, depending on the zoom position, the
lower limit value of macro range may be
different. The units can be switched between
feet and m in the ZOOM & FOCUS item of the
setting menu DISPLAY SETUP screen.
20 Index/shot mark recording display
(INDEX/ SHOT MARK)
Displayed when a USER button to which the
INDEX function or SHOT MARK function has
previously been allocated is pressed during
recording.
INVALID will be displayed if an index or shot
mark cannot be attached.
21 ND filter display
ND filter selected is displayed.
22 Gain display
Displays the gain value of the image amplifier
configured. (During the auto mode, AGC is
displayed.)
23 AWB information display
Displays the information of white balance.
ATW: When ATW is set
P3.2K/P5.6K: In the case of preset
Ach/Bch: In the case of A/B
LOCK: When ATW is locked