Filter
Top Products
Menu
89
SW MODE screen (continued)
Item
Display
mode
Description of settings
USER2 (Camera)
(PB)
Assigns a function to the USER2 button.
The setting contents are the same as USER1.
BACKLIGHT
USER3 (Camera)
(PB)
Assigns a function to the USER3 button.
The setting contents are the same as USER1.
INDEX
FOCUS
ASSIST
(Camera) Assigns a function to the FOCUS ASSIST button.
EXPANDED: The central part of the screen will be enlarged by a factor of about
4 in the vertical direction and by a factor of about 6 in the horizontal
direction.
“EXPANDED” is displayed on the screen during the expanded
display.
GRAPH: Displays a frequency distribution graph at the top right in the viewfinder
and LCD monitor.
BOTH: Magnifies the center portion of the image and displays a frequency
distribution graph.
(The frequency distribution graph is displayed on either the viewfinder or
the LCD monitor.)
WFM (Camera) Switches the waveform display that appears when the WFM button is pressed.
WAVE: Displays as a waveform. Each time the button is pressed the
setting changes in this order: OFF → WAVE (waveform) → OFF.
VECTOR: Displays as a vector. Each time the button is pressed the setting
changes in this order: OFF → VECTOR → OFF.
WAVE/VECTOR:
Each time the button is pressed the setting changes in this order:
OFF → WAVE (waveform) → VECTOR → OFF.
LCD (Camera)
(PB)
Assigns a function to the LCD button.
LCD REV: Flips the LCD image vertically and horizontally.
LCD BL: Switches the brightness of the LCD backlight.
The backlight brightness setting registered in LCD BL will remain stored
even if the function allocated to the LCD button is changed.
•
indicates the factory setting.