Filter
Top Products
24
This camera has two viewfinders; one is a
miniature LCD in the viewfinder and the other is a
retractable 3.5-inch LCD.
Use the viewfinder that best suits the application
and shooting conditions.
The brightness and hue may differ between the
images appearing on the viewfinder and LCD
monitor and those displayed on a TV monitor. To
see how the final images will appear, check them
on a TV monitor.
Using the viewfinder
1
Set the POWER switch to ON and check that
images appear in the viewfinder.
POWER
ON
OFF
2
Adjust the viewfinder’s angle so that the
screen is positioned where it is easiest to
see.
You can move the viewfinder out to about
90° perpendicular to the camera.
3
Adjust the diopter adjustment dial so
that you can see the characters on the
viewfinder screen clearly.
Diopter adjustment dial
Eye piece
Do not allow the eyepiece of the viewfinder
to remain in direct contact with sunlight or
other strong light sources.
Internal components may be damaged and fire
may be caused if light accumulates through
the lens.
•
•
•
Viewfinder
Fitting the eye cup
Attach the eye cup by aligning the projections on
the eye cup holder and eye cup and fitting them
together.
Turning the eye cup after attaching it may
cause the eye cup holder to come off. If the
eyecup holder does come off, see “Cleaning
the Viewfinder” (Page 106) for details on how
to refit it.
Eye cup holder
Eye cup
Projections
•