Filter
Top Products
120
Preparation: Preparing for Audio Input
Take the following steps to prepare the camera for connecting audio input devices.
The unit can be equipped with the AJ-MC900G stereo
microphone kit (optional).
1 Open the microphone holder.
2 Mount the microphone and tighten the clamping screw.
The microphone must be attached with the UP mark on
the microphone facing up.
a. Clamping screw
3 Connect the microphone cable to the MIC IN jack on the
camera.
b. MIC IN jack
4 Set the AUDIO IN switch to [FRONT] depending on the
audio channel to be recorded.
c. AUDIO IN switch
1 Remove the cover to insert the wireless receiver and
secure it with the screws.
2 Set the AUDIO IN switch to [W.L.] depending on the
audio channel to be recorded.
3 When using a 2-channel wireless receiver, select
“DUAL” in the WIRELESS TYPE menu option. The
menu option WIRELESS TYPE can be found in the
<MIC/AUDIO2> screen on the MAIN OPERATION
page.
Preparing for Audio Input
When Using the Front Microphone
a
b
c
When Using a Wireless Receiver
When Using the Unislot Wireless Receiver
AJ-HPX3700G-VQT1V68_eng.book 120 ページ ２００８年１０月１５日 水曜日 午後６時３８分