Filter
Top Products
91
Adjustments and Settings for Recording
: Handling data
Adjustments and Settings for Recording
The unit employs 6 sets for the file data area.
FACTORY data:
The area for storing factory settings
Data cannot be revised with menu operations.
CINEMATOGRAPH data:
The area for storing cinematograph settings.
Data cannot be revised with menu operations.
USER data:
The area for storing the data set by menu operations
The FACTORY data is stored as the factory setting.
CURRENT data:
The area for storing the operating status of the unit
The set value in this area is revised by menu operations.
SCENE file:
16 sets of scene files are provided.
LENS file:
64 sets of lens files are provided.
For menu items that can be read from or stored in the
respective areas, refer to [Menu] (page 166).
Notes
For information about how to navigate through the menu
for this section, see [Setting Menu Options] (page 168).
Access the respective data settings files after switching
the PC MODE to “OFF”. If the respective data settings
files are accessed when the unit is in USB DEVICE mode,
an error may occur. The PC MODE can be operated from
the <SYSTEM MODE> screen on the SYSTEM SETTING
page.
Do not edit the data stored on the SD memory card using
a PC or the like.
An SD memory card (optional) can be used as a setup card that stores up to 8 files of settings menu specifications.
This data allows you to quickly reproduce an optimum state.
Regarding SD memory cards, please see <Cautions in using SD memory cards> (page 23).
Handling data
Set data file configuration
Setting Data Using an SD memory card
LENS FILE
READ
LENS FILE
WRITE
WRITE USER
DATA
READ USER
DATA
LENS FILE CARD R/W
WRITE
LENS FILE CARD R/W
READ
READ FACTORY
DATA
SD CARD READ/WRITE
WRITE
SD CARD READ/WRITE
READ
SCENE
WRITE
SCENE
READ
READ
CINEMATOGRAPH
Menu operations
SD memory card
SET UP data
It is possible to write 8 setup files on
the SD memory card.
CURRENT data
(Operating status of the unit)
No. of files: 1
USER data
FACTORY data
(Revision disable)
No. of files: 1
: Files built in the unit
: Menu operations
SCENE file
LENS file
SD memory card
Lens file
It is possible to write 8 titles for 8 lens files
on the SD memory card.
No. of files: 8
To revise the set
value
No. of files: 16
No. of files: 1
No. of files: 64
No. of files: 88
CINEMATOGRAPH data
(Revision disable)
No. of files: 1
AJ-HPX3700G-VQT1V68_eng.book 91 ページ ２００８年１０月１５日 水曜日 午後６時３８分