Filter
Top Products
30
Parts and their Functions: Viewfinder
15. Viewfinder left-right position anchoring ring
Used to adjust the side-to-side position of the
viewfinder.
16. Viewfinder front-back position anchoring lever
Used to adjust the fore-and-aft position of the
viewfinder.
Note
For more information, see the instruction manual for the
viewfinder.
If, when fitting a large lens, there is insufficient space
between the top of the lens and the bottom of the viewfinder,
the positions of the slide rails can be shifted upwards slightly
by repositioning the screws.
a. Conventional screw positions
b. Reposition and fix 3 screws here to raise the slide rail by
approximately 8 mm.
16
15
a
b
AJ-HPX3700G-VQT1V68_eng.book 30 ページ ２００８年１０月１５日 水曜日 午後６時３８分