Filter
Top Products
19
2QVFUHHQ'LVSOD\
FRQWLQXHG
3LFWXUHDQGYROXPHDGMXVWLQJNQREVVWDWXVGLVSOD\
PHASE
CHROMA
EXIT
BRIGHT
B.LIGHT
PEAK F-IN-R
20
[
PHASE
]
VOLUME
CONT.
3LFWXUHDGMXVWLQJNQRESDJH
These are rotary push knobs.
If you press a knob, the setting value state
appears at the bottom left, and the item assigned
to the corresponding knob is displayed at the
bottom right.
If multiple items are assigned to one knob, you
can press the knob to switch items.
The indication disappears when you press
[ENTER] or after 10 seconds of inaction.
Only adjustments that appear on the screen can
be adjusted.
6WDWXVGLVSOD\
The status of an item can be identified by the
display color of the item name (page 11, “Picture
and volume adjusting knobs”).
White: An item not target for adjustment.
Green: An item target for adjustment.
Gray: An item which cannot be adjusted.
6KDUSQHVVGLVSOD\
SHARPNESS H 30
Indicates the “SHARPNESS H/V” setting value of
the “VIDEO CONFIG” menu.
If no operation is performed for 2 minutes,
the setting value is confirmed and the display
disappears.
)XQFWLRQGLVSOD\
F1:WFM/VECTOR
F2:PIXEL TO PIXEL
F3:FOCUS-IN-RED
XXXXX
Use the menu to open and set up functions.
When “FUNCTION DISPLAY” (page 39) is set
to ON1 or ON2, press any of the “FUNCTION1”
to “FUNCTION3” buttons to display the functions
assigned to the FUNCTION buttons.
In 3D assist mode (page 52), [FUNCTION3]
becomes the 2D picture quality adjustment mode
button.
If no operation is performed for 2 seconds,
the setting value is confirmed and the display
disappears.
“XXXXX” indicates operating status (page 41,
“Functions displayed during FUNCTION button
operation”).