Filter
Top Products
40
0DLQ0HQX
FRQWLQXHG
)81&7,21VHWWLQJUHVWULFWLRQV
Ŷ
Under the following conditions, “INVALID FUNCTION” is displayed and the settings cannot be configured.
6HWWLQJV Inoperable Condition or Mode
HV DELAY SUB WINDOW
WFM
PIXEL TO PIXEL
3D ASSIST
When HDMI (640 x 480) input
GAMMA SELECT When GPI is set
When HDMI (640 x 480) input
SD ASPECT When GPI is set
SUB WINDOW (Still image)
3D ASSIST
When HDMI (640 x 480) input
SCAN When GPI is set
SUB WINDOW
PIXEL TO PIXEL
3D ASSIST
When HDMI (640 x 480) input
SUB WINDOW 3D ASSIST
When HDMI (640 x 480) input
WFM/VECTOR (VECTOR is not displayed when other than SDI1 or SDI2 input)
SUB WINDOW
PIXEL TO PIXEL
3D ASSIST
When HDMI (640 x 480) input
MARKER When GPI is set
SUB WINDOW
3D ASSIST
When HDMI (640 x 480) input
WHITE BALANCE When other than VAR1 to VAR3 selected in COLOR TEMP.
PIXEL TO PIXEL (Enabled when 1080i/p signal input)
When other than 1080i/p signal input
SUB WINDOW
3D ASSIST
FOCUS-IN-RED When WFM is ON
When GPI is set
When INT-SG is selected
LEVEL METER When other than SDI1, SDI2, or HDMI input
MONO When GPI is set
When HDMI (640 x 480) input
TIMECODE When other than HD-SDI input
CLOSED CAPTION When HDMI (640 x 480) input
When VF signal input
When YP
B
P
R
signal input
3D ASSIST
The function assigned to FUNCTION3 does not work when you operate the unit in 3D assist mode
because the FUNCTION3 button becomes specifically for switching to 2D picture adjustment mode (2D
ADJUST).