Filter
Top Products
38
0DLQ0HQX
FRQWLQXHG
FUNCTION
The underlined values are factory preset setting values.
6XEPHQX 6HWWLQJV Description
FUNCTION 1 -
FUNCTION 3
HV DELAY
BLUE ONLY
GAMMA SELECT
SD ASPECT
SCAN
SUB WINDOW
WFM/VECTOR
MARKER
WHITE BALANCE
PIXEL TO PIXEL
PIXEL POSITION
FOCUS-IN-RED
ZEBRA
REAR TALLY
LEVEL METER
CROSS HATCH
MONO
BLACK MODE
TIME CODE
CLOSED CAPTION
UNDEF
(Factory default:
FUNCTION1:
WFM/VECTOR
FUNCTION2:
PIXEL TO PIXEL
FUNCTION3:
FOCUS-IN-RED)
Selects functions to be assigned to [FUNCTION1] -
[FUNCTION3] (front panel buttons).
<HV DELAY>
*
1
Displays the image blanking period.
The display changes in the following order.
'(/$<2))ĺ+'(/$<ĺ9'(/$<ĺ+9'(/$<ĺ
DELAY OFF
<BLUE ONLY>
*
1
Cuts the red and green signals. Use this function to check
phase and chroma. This button toggles between ON and
OFF.
<GAMMA SELECT>
*
2
*
3
Displays the gamma curve.
The display changes in the following order.
*$00$67$1'$5'ĺ*$00$),/0ĺ
*$00$67',2367ĺ*$00$67$1'$5'
<SD ASPECT>
*
2
*
3
Switches between “16:9” and “4:3.”
<SCAN>
*
2
*
3
Switches between “UNDER SCAN” and “NORMAL SCAN”.
<SUB WINDOW>
*
1
Sets the split-screen function.
The display changes in the following order.
6,1*/(ĺ)8//3$57ĺ67,//ĺ6,1*/(
<WFM/VECTOR>
*
2
Displays waveform or vector display.
For details on the available operation items, refer to page
41.
<MARKER>
*
2
*
3
*
4
Turns the marker on and off.
For details on the available operation items, refer to page
41.
<WHITE BALANCE>
WHITE BALANCE GAIN/BIAS RGB direct adjustment can
only be accessed when VAR1 to VAR3 are selected in
COLOR TEMP.
<PIXEL TO PIXEL>
Turns the PIXEL TO PIXEL function On and Off.
<PIXEL POSITION>
Positions the display of signals in PIXEL TO PIXEL mode.
(Continued on next page)
The settings are cancelled when the power is turned OFF.
*
1
If these settings are changed, the menu settings will also change.
*
2
The control settings do not operate during GPI operation.
*
3
Not displayed when 16:9, 4:3 and CENTER are all OFF in the MARKER menu settings.
*
4