Filter
Top Products
VQT1T27
112
Connecting to other equipment
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition)
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P26) in the [SETUP] menu has been executed
• When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
• When there is a picture with file number 999 inside the folder
∫ Connection in the PTP mode (Windows
R
XP, Windows Vista
R
and Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
mode.
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
1 Folder number
2 File number
3 JPG: Pictures
MOV: Motion pictures
RW2: Pictures in RAW files
MISC: DPOF print
favorite
Built-in memory
Card
100_PANA
101_PANA
999_PANA
DCIM
MISC
100_PANA
P.PC_DMC-LX3_eng.book 112 ページ ２００８年７月８日 火曜日 午後１０時１３分