37
VQT1T27
Basic
It is possible to set the focus to the specified subject. Focus will keep following the subject
automatically even if it moves. Refer to P83 for details.
•
Set the [AF TRACKING] in the [REC] mode menu to [ON]. ([ ] is displayed on the screen.)
Bring the subject to the AF tracking frame, and press
[AF/AE LOCK] to lock the subject.
•
AF tracking frame will turn yellow.
• An optimum scene for the specified subject will be chosen.
• Press [AF/AE LOCK] again to cancel.
• Open the flash when the flash is to be used. (P46)
• When [‡] is selected, [ ], [ ] or [ ] is set depending on the type of subject and
brightness.
• When [ ] or [ ] is set, digital red-eye correction (P47) will turn on and flash is
activated twice.
• Flash modes cannot be switched using 1 (‰) in the intelligent auto mode.
• Only the following functions can be set in this mode.
[REC] mode menu
– [PICTURE SIZE]
¢
(P76)/[AF TRACKING] (P83)
¢ The settings which can be selected are different from when other [REC] modes are used.
[SETUP] menu
– [CLOCK SET]/[WORLD TIME]/[TRAVEL DATE]/[BEEP]/[LANGUAGE]
• The settings of the following items are fixed.
AF Tracking Function
About the flash
Settings in Intelligent auto mode
Item Settings
[Fn BUTTON SET] (P24) o
[GUIDE LINE] (P25) ([REC. INFO.]: [OFF])
[ECONOMY]
([POWER SAVE]) (P26)
[5MIN.]
[AUTO REVIEW] (P26) [2SEC.]
Focus range The focus range becomes the same as AF macro mode.
[1 cm (0.04 feet) (Wide)/30 cm (0.99 feet) (Tele) to
¶
] (P49)
• The maximum close-up distance (the shortest distance at
which the subject can be taken) differs depending on the
zoom magnification.
Self-timer (P50) 10 seconds
[FILM MODE] (P74) [STANDARD]
[QUALITY] (P77) A (Set to [›] when picture size is [ ] (0.3M ))
[INTELLIGENT ISO] (P78) [ON] (The maximum ISO sensitivity: ISO800)
[ISO LIMIT SET] (P79) 800
[WHITE BALANCE] (P79) [AWB]
AF/AE
LOCK
P.PC_DMC-LX3_eng.book 37 ページ 2008年7月8日 火曜日 午後10時13分