Filter
Top Products
53
VQT1T27
Advanced (Recording pictures)
Pressing the shutter button once automatically takes three pictures with aspect ratios of
[4:3], [3:2] and [16:9] (with a single shutter sound).
Press [DISPLAY] to display [MULTI ASPECT] from
the auto bracket.
• It is switched between auto bracket and multi aspect every time
[DISPLAY] is pressed.
Press 2/1 to select [ON].
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to finish.
• The combinations of picture sizes are as follows.
E.g. If setting is 6.5M (3:2)
•
7M (4:3), 6.5M (3:2) and 6M (16:9).
¢
When the multi aspect option is selected, the number of pixels cannot be set lower than
the above values. If values have been set previously, they are temporarily changed to
the above values.
Note
•
When setting auto bracket, [ ] appears on the screen.
• When setting multi aspect, [ ] appears on the screen.
• When taking pictures using auto bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower
left of the screen.
• The auto bracket/multi aspect setting is canceled if you turn the camera off or [POWER SAVE]
is activated.
• When auto bracket/multi aspect is set, the auto review function is activated regardless of the
auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the
[SETUP] menu.
Press 3 [È] until [AUTO BRACKET] appears, set
the compensation range of the exposure with 2/1.
• When you do not use auto bracket, select [OFF] (0).
Press [MENU/SET] to finish.
• You can also press the shutter button halfway to finish.
Multi Aspect
[4:3] -. [3:2] -. [16:9]
10M 9.5M 9M
7M 6.5M 6M
5M 4.5M 4.5M
3M
¢
3M
¢
2.5M
¢
1
2
1
2
3
P.PC_DMC-LX3_eng.book 53 ページ ２００８年７月８日 火曜日 午後１０時１３分