Filter
Top Products
75
VQT1T27
Advanced (Recording pictures)
¢ You can also use in motion picture mode.
Note
•
You cannot adjust [SATURATION] in the black and white settings in film mode.
• Film mode adjustments cannot be made in scene mode.
1 Press 2/1 to select a film.
•
Press [DISPLAY] to display descriptions of the film modes (press
again to return to the previous screen).
2 Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
∫ Adjusting each film mode to the desired setting
1 Press 2/1 to select a film.
2 Press 3/4 to select an item and 2/1 to adjust.
• Registered settings are memorized even if the camera is turned off.
3 Press 3/4 to select [MEMORY], and press [MENU/SET].
4 Press 3/4 to select an item, and then press [MENU/SET].
•
You can register 2 settings. ([MY FILM 1] and [MY FILM 2])
(After registering, the film mode name that was registered
previously is displayed.)
• [STANDARD] is registered in [MY FILM 1] and [STANDARD] ( )
is registered in [MY FILM 2] at the time of purchase.
5 Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
[ ][STANDARD]
¢
: This is the standard setting.
[ ][DYNAMIC]
¢
: The saturation and contrast of the stored colors are increased.
[ ][NATURE]: Brighter red, green and blue. Enhanced beauty of nature.
[ ][SMOOTH]
¢
: The contrast is lowered for smoother and clearer color.
[ ][VIBRANT]: Higher saturation and contrast than dynamic.
[ ][NOSTALGIC ]: Lower saturation and contrast. Reflecting passage of time.
[ ][STANDARD] ( )
¢
: This is the standard setting.
[ ][DYNAMIC] ( ): The contrast is increased.
[ ][SMOOTH] ( ): Smooths the picture without losing the skin texture.
[ ][MY FILM 1]
[ ][MY FILM 2]: The saved setting is used.
[ ][MULTI FILM]: One press of the shutter button automatically records the
picture to a selected number of films (up to a maximum of three
films).
B
&
W
B
&
W
B
&
W
B
&
W
DMC-LX3-Body2_mst.fm 75 ページ ２００８年７月９日 水曜日 午後２時１６分