Filter
Top Products
39
VQT1T27
Basic
∫ Types of zooms
•
When using the zoom function, an estimate of the focus range will appear in conjunction
with the zoom display bar. (Example: 0.5 m (1.64 ft.) –¶)
¢1 The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting.
¢2 The on-screen zoom indication may momentarily stop moving when you rotate the zoom
lever to the extreme Tele position. You can enter the digital zoom range by continuously
rotating the zoom lever to Tele or releasing the zoom lever once and then rotating it to Tele
again.
∫ Extended optical zoom mechanism
When you set the picture size to [ ] (3 million pixels), the 10M (10.1 million pixels) CCD
area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher
zoom effect.
Note
•
The digital zoom cannot be set when õ has been selected.
• The indicated zoom magnification is an approximation.
• “EZ” is an abbreviation of “Extended optical Zoom”.
• The optical zoom is set to Wide (1k) when the camera is turned on.
• If you use the zoom function after focusing on the subject, focus on the subject again.
• The lens barrel extends or retracts according to the zoom position. Take care not to interrupt
the motion of the lens barrel while the zoom lever is rotated.
• When using the digital zoom, [STABILIZER] may not be effective.
• When using the digital zoom, we recommend using a tripod and the self-timer (P50) for taking
pictures.
Feature Optical zoom
Extended optical zoom
(EZ)
Digital zoom
Maximum
magnification
2.5k 4.5k
¢1
10k [including optical zoom
2.5k]
17.9k [including extended
optical zoom 4.5k]
Picture
quality
No deterioration No deterioration
The higher the magnification
level, the greater the
deterioration.
Conditions None
[PICTURE SIZE] with
(P76) is selected.
[DIGITAL ZOOM] (P87) on the
[REC] menu is set to [ON].
Screen
display
A
[ ] is displayed.
B The digital zoom range is
displayed.
The AF area becomes larger
when the shutter button is
pressed halfway in the digital
zoom range
¢2
.
T
W
T
W
A
T
W
T
W
B
P.PC_DMC-LX3_eng.book 39 ページ ２００８年７月８日 火曜日 午後１０時１３分