Filter
Top Products
VQT1T27
26
Preparation
• Refer to P58 for details.
• Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
• [POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
• [POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
• The status indicator lights while the LCD monitor is turned off. Press any button to turn on the
LCD monitor again.
• [AUTO LCD OFF] does not work while operating menu or playback zoom.
• AV and HD output is turned off while LCD monitor is turned off.
• The auto review function is activated regardless of its setting when using auto bracket (P52)/
multi aspect (P53), [MULTI FILM] (P76), [HI-SPEED BURST] (P66) and [FLASH BURST] (P67)
in scene mode, burst mode (P54) and when recording still pictures with audio (P95). (The
pictures cannot be enlarged.)
• In Intelligent auto mode, the auto review function is fixed to [2SEC.].
• If [HIGHLIGHT] (P25) is set to [ON], white saturated areas appear blinking in black and white
when the auto review function is activated.
• The folder number is updated and the file number starts from 0001. (P112)
• A folder number between 100 and 999 can be assigned.
[MF ASSIST]
In manual focus, the assistance screen appears on the center of
the screen to facilitate focusing on the subject.
[OFF]:
[MF1]:
The center of the screen is enlarged.
[MF2]:
The center of the screen is enlarged over the whole screen.
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]: The pictures are displayed until one any of the buttons
is pressed.
[ZOOM]: The picture is displayed for 1 second and then
enlarged 4k and displayed for 1 more second.
v [NO.RESET]
Reset the file number of the next recording to 0001.
P.PC_DMC-LX3_eng.book 26 ページ ２００８年７月８日 火曜日 午後１０時１３分