Filter
Top Products
Preparation
22
VQT1F83
[ZOOM RESUME]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
The zoom position is stored when this unit
is turned off. When this unit is turned on
again, the zoom automatically returns to
the position it was at when this unit was
turned off. (P30)
[ON], [OFF]
[MF ASSIST] (P52)
(Recording mode only)
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
In manual focus, the assistance screen
appears on the center of the screen to
facilitate focusing on the subject.
[BEEP]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
This allows you to set the beep.
[AF BEEP]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
This allows you to set the AF beep.
[SHUTTER]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
This allows you to set the shutter sound.
[VOLUME]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
The volume of speakers can be adjusted in
7 steps from level 6 to 0.
• When you connect the camera to a TV,
the volume of the TV speakers does not
change.
[NO.RESET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Reset the file number of the next recording
to 0001.
• The folder number is updated and the file
number starts from 0001. (P112)
• A folder number between 100 and 999
can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.
• To reset the folder number to 100, format
(P110) the built-in memory or the card first
and then use this function to reset the file
number.
A reset screen for the folder number will
then appear. Select [YES] to reset the
folder number.
[RESET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
The [REC], [CUST. SET MEM.] or [SETUP]
menu settings are reset to the initial
settings.
• [FAVORITE] (P98) is fixed to [OFF] and
[ROTATE DISP.] (P97) is fixed to [ON].
• If the [SETUP] menu settings are reset,
the following settings are also reset.
[MF1]: The center of the screen is
enlarged. You can adjust the
focus while determining the
composition of the whole of the
screen.
[MF2]: The center of the screen is
enlarged over the whole
screen. This is convenient for
adjusting the focus in wide
angle shots for which changes
in focus are difficult to grasp.
[OFF]: The screen is not enlarged.
[]: No operation sound
[]: Soft operation sound
[]: Loud operation sound
[]: No AF beep
[]: Soft AF beep
[]: Loud AF beep
MENU
SET
MENU
SET
MENU
SET
MENU
SET
[]: No shutter sound
[]: Soft shutter sound
[]: Loud shutter sound
MENU
SET
MENU
SET
MENU
SET
MENU
SET