Filter
Top Products
Advanced (Recording pictures)
47
VQT1F83
• When setting auto bracket, the auto
bracket icon [ ] appears on the screen.
• When taking pictures using auto bracket
after setting the exposure compensation
range, the pictures taken are based on the
selected exposure compensation range.
When the exposure is compensated, the
exposure compensation value appears on
the lower left of the screen.
• The auto bracket setting is canceled if you
turn the camera off or power save mode is
activated.
• When setting auto bracket and burst mode
simultaneously, auto bracket will be
performed.
• When auto bracket is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
• When auto bracket is activated,
[AUDIO REC.] cannot be used.
• The exposure may not be compensated
with auto bracket depending on the
brightness of the subject.
• In shutter-priority AE and manual
exposure, if the shutter speed is set to
more than 1 second auto bracket is
disabled.
• When the flash is activated or the number
of recordable pictures is 2 or less, you can
take only 1 picture.
• You cannot use the following functions.
– [STARRY SKY] in scene mode
– When the quality is set to [RAW] or
[RAWKJPEG]
Taking Pictures using
Burst Mode
1 Press and hold the single or burst
mode button until
[BURST SHOOTING] appears.
2 Press / to select a mode.
• You can also press the single or burst
mode button to select.
3 Press [MENU/SET].
• You can also press the shutter
button halfway or press the center of
the joystick to finish.
• The menu screen disappears after
about 5 seconds. At this time, the
selected item is automatically set.
4 Take a picture.
• Hold down the shutter button fully to
activate the burst mode.
or