Filter
Top Products
Preparation
14
Using the AC Adaptor
If you use an AC adaptor as indicated in 3,
you can use the camera without worrying
about battery discharge.
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is retracted.
1 Connect the AC cable.
2 Open the DC IN terminal door.
3 Connect the DC cable (supplied) to
the camera.
• The camera becomes warm during use.
However, this is not a malfunction.
• Disconnect the AC adaptor and DC cable
when the camera is not in use.
• The battery cannot be charged in the
camera with the AC adaptor connected.
• Use the supplied DC cable.
1
2
3
FZ2-PP.book 14 ページ ２００３年９月２６日 金曜日 午後１２時１分