Filter
Top Products
Recording images (basic)
32
Checking the Captured Picture
(Review)
After taking a picture, when auto review (P82)
is set to [1SEC.]/[3SEC.], the captured picture
is displayed on the LCD monitor/Viewfinder
for 1 or 3 seconds, but you can also check the
picture by following the methods shown
below.
1 After taking a picture, press the 4/
[REVIEW/SET] button.
• You can check the previous or following
picture with 2/1.
• The last captured picture is displayed
for about 5 seconds. If you rotate the
zoom lever towards [ ], the captured
picture is zoomed 4 times (A) and
8 times if you rotate it once again. You
can also change the position with 3/
4/2/1.
ª Erasing the captured picture
during the review
2 Press the [ ] button.
3 When the message [DELETE THIS
PICTURE?] is displayed, press 2 to
select [YES].
4
Press the
4/
[REVIEW/SET]
button.
• The picture is erased.
• Once erased, pictures cannot be
recovered.
• Multi images or all images can be
deleted. Read P70 to operate them.
• Press the shutter button halfway to cancel
the review.
• In motion image mode [ ], review cannot
be used.
2
1,3,4
1
WT
REVIEW1
X
8X1X
DELETEEXIT
DELETE
4
X
REVIEW4
X
1
DELETE SINGLE
DELETE THIS PICTURE?
YES NO
SET
SELECT
MULTI/ALL
3
FZ2-PP.book 32 ページ ２００３年９月２６日 金曜日 午後１２時１分