Filter
Top Products
Preparation
15
Inserting the Card
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is retracted.
• Close the flash. (P37)
[Inserting the card]
1 Slide the lever in the direction of the
arrow to open the Memory Card/
battery door.
2 Insert the card with the label facing
the front of the camera.
• Insert the card, pressing gently until it
locks in place. If the card will not insert
freely, it may be reversed. Do not force
the card.
• Do not touch the connection terminals
on the back side of the card.
3 Close the Memory Card
/battery
door.
[Removing the card]
1
Open the Memory Card/battery door.
2
Press the card to release.
3
Pull the card out.
4
Close the
Memory Card/battery
door.
• If the Memory Card/battery door cannot be
completely closed, take the card out and
insert it again.
• If the card cannot be fully inserted, verify
whether the direction of the card is correct.
• We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
• If the card is not fully inserted, the card may
be damaged.
2
2
3
4
OPEN
OPEN
FZ2-PP.book 15 ページ ２００３年９月２６日 金曜日 午後１２時１分