Filter
Top Products
Preparation
20
ª Temporarily storing the lens hood
You can store the lens hood in the camera
temporarily. Please do not take a picture with
the lens hood stored.
[Preparation]
• Check that the power switch is set to [OFF]
and the lens barrel is retracted.
• Close the flash. (P37)
1 Remove the lens hood.
2 Reverse
the lens hood and
attach
it.
• Attach the lens hood adjusting the
mark ± of the lens hood adaptor to the
mark of the lens hood, and rotate the
lens hood to the right.
3 Attach the lens cap.
• It is recommended that the lens hood be
removed when using the flash. Vignetting
can occur, causing the lower portion of the
photo to be dark.
• The lens cap can be installed while the lens
hood is in use if the lens cap string is not
used.
1
2
3
FZ2-PP.book 20 ページ ２００３年９月２６日 金曜日 午後１２時１分