Filter
Top Products
Recording images (basic)
38
Using the Optical Image Stabilizer
When using this function, you can minimize
jitter.
[Preparation]
• Set the mode dial except for [ ]/[ ].
(P25)
1 Press the [MENU] button.
2 Press 3/4 to select [STABILIZER].
3 Press 2/1 to select [ON]/[OFF].
4 Press the [MENU] button.
• The menu will disappear.
• Only when selecting [OFF], the
indication [ ] 1 will appear.
• When too much jitter happens or when taking a picture chasing a moving subject,
it may not be stabilized.
• The stabilizer function may be less effective in the digital zoom zone.
• When taking pictures with slow shutter speed such as night portrait, the stabilizer
function may be less effective.
• When the zoom lever is close to T and the shutter speed is slower than 1/125th,
the jitter alert 2 appears.
• We recommend using a tripod when the jitter alert appears.
• In simple mode [ ], the stabilizer function is fixed to [ON].
• Usually, set the stabilizer function to [ON]. Set it to [OFF] in the following cases:
– When you want designedly blurred pictures.
– When you use a tripod.
1,4
2,3
OFF
2,3
4
STABILIZER
OFF ON
P
1600
REC
4
/
4
SETUP
SELECT SET
EXIT
MENU
OFF
FZ2-PP.book 38 ページ ２００３年９月２６日 金曜日 午後１２時１分