Panasonic DMC-FZ2PP Digital Camera User Manual


 
Preparation
17
Turning Power on/off
1 Set the power switch to [ON].
The power indicator 1 lights.
2
Set
the power switch to [OFF].
ª
Power indicator
Lighting:
When turning the power switch to [ON]
Blinking:
When the Memory Card/battery door is
opened
When the card is not inserted
When no space is left on the card
When the card is protected during
recording
When setting the mode dial from the
playback mode to recording mode with
the lens cap attached
When the remaining battery power is
low (blinking slowly)
When turning on the power in the recording mode, do not put any obstacle in front
of the lens.
Please be sure to remove the lens cap before you switch on the camera in
recording mode. If not, the message “REMOVE LENS CAP AND PRESS
BUTTON” appears on the LCD monitor/Viewfinder. Please remove the lens
cap and press 4/[REVIEW/SET] button 2.
Do not exert any pressure on the lens when it is extended. To clean the lens,
please turn the camera off to retract the lens.
OFF≥≥ON
1,2
OFF≥≥ON
FZ2-PP.book 17 ページ 2003年9月26日 金曜日 午後12時1分