Filter
Top Products
25
Basic Operation
Capturing Images
1Press REC MODE repeatedly to select
Motion ( ) or Burst ( ) recording
mode.
2Press ZOOM T or W to zoom In and
Out.
• Zoom magnification level is up to x3.
• There is no zoom indication on the
LCD Viewfinder.
3Press SHTR down halfway to lock
Auto Focus.
• Beep sounds twice. (See page 27.)
4Hold down the SHTR button the rest of
the way to actually capture the image.
If you select AUDIO ON, audio will be
recorded through the MIC.
Motion Image Rec Mode
Burst Rec Mode
3, 4
You can capture a motion image by
selecting in REC MODE. And you can
capture a burst image by selecting in
REC MODE.
Open the Lens Cover. Set the POWER
to REC or MANUAL REC. (See pages
19~20.)
Before you begin
REC
SEP. 10 2000
10 : 00 AM
10
MIC
REC
OFF
PLAY
PC
MANUAL
REC
VOL
+
VOL
-
-
+
LCD Viewfinder
2
1
REC MODE
• A Motion Image
can be captured
up to 10 seconds while SHTR is
pressed with audio.
REC MODE
• A Burst Image
can be captured
every 0.5 seconds/frame up to 16
frames while SHTR pressed.
• While the Digital Camera processes
the image, REC will blink on the LCD
Viewfinder and the captured image
will be displayed on the LCD
Viewfinder for a few seconds.
• Cannot record audio.
Note
• If you select
, you can not record
audio.
• When a captured image is displayed on
the LCD Viewfinder, you will not be able
to capture another image until that image
is no longer displayed on the screen.
• The power automatically shuts off to
conserve power if there is no activity for
over one minute while the battery is used
as a power source. Press SHTR to return
POWER on.
SD4090.p22-33.p65 99/11/11, 16:3925