Panasonic PV-SD4090 Digital Camera User Manual


 
43
Special Features
REC
OFF
PLAY
PC
MANUAL
REC
VOL
+
VOL
-
-
+
To Copy All Images
You can copy all of the images stored on a
Disk Media to another Disk Media using
this operation.
1Press or to select COPY.
2Press to display COPY menu and
select COPY ALL.
3Press to display COPY ALL menu
and press
or to select YES.
• Select NO to return to the COPY
MENU.
4Press SHTR to copy.
• “PLEASE WAIT”, then “PLEASE
CHANGE DISK” is displayed. After
Disk is changed, “PLEASE WAIT” is
displayed as all of the images are
copied. When copying is complete,
the screen below will be displayed.
Press MENU twice to exit.
Important:
• While “PLEASE WAIT” is displayed, do
not turn off the Digital Camera or
unplug the AC Adaptor (supplied)
because this will cause irreversible
damage to the memory, resulting in
reduced image storage capacity.
When copying images from one disk to
another, the images are temporarily stored in
camera memory before being copied to the
target disk. As the camera memory is only
equal to about one Floppy Disk, all the
SuperDisk Diskette images cannot be stored
and COPY ALL cannot be used. If COPY ALL
is selected when SuperDisk is the source,
"CANNOT COPY ALL THE SUPERDISK" will
be displayed.
If the memory capacity of the SuperDisk
Diskette or Floppy Disk that you want to copy
to is not sufficient, the following message will
appear.
You can copy images from a Floppy Disk to
another Floppy Disk or a SuperDisk Diskette
providing the TARGET disk has enough
space.
Set the POWER Switch to PLAY. (See
pages 19~20.)
Before you begin
<PLAY MENU 1/2>
DISPLAY MODE
DELETE
COPY
AUDIO
PRINT MARK
SEL : SET :
EXIT : MENU
NORMAL
ON
<COPY>
COPY PAGE
COPY ALL
SEL : SET :
EXIT : MENU
<COPY ALL>
NO
YES
COPY ALL PAGES
OK?
SEL :
ENTER : SHTR
PLEASE WAIT
Note
NOT AVAILABLE DISK
CONTINUE
EXIT
: SHTR
: MENU
NOT ENOUGH DISK SPACE
CONTINUE
EXIT
: SHTR
: MENU
4
1, 2, 3
COPYING IS COMPLETE
SD4090.p34-44.p65 99/11/11, 16:4043