Filter
Top Products
48
For assistance, call 1-800-272-7033.
Personal Computer
REC
OFF
PLAY
PC
MANUAL
REC
Transferring Your Images (Windows 98)
1Turn on your PC.
2Set the POWER Switch to PC on the Digital Camera.
• The POWER LED lamp lights up.
• LCD Viewfinder is off in PC mode.
3Connect the Digital Camera to your PC (Windows) using the USB Cable (supplied).
• You can use this Digital Camera as a SuperDisk Drive. (See pages 61, 62, 63, 65.)
• For extended periods of use, it is recommended to use the AC Adaptor (supplied) as a
power source.
• Once the USB driver is installed, the Digital Camera can be connected even after the
PC has been started. The USB Cable (supplied) must be connected as described in
the above steps.
By using the included USB cable to
connect to a PC, you can use your
SuperDisk camera as an external storage
device.
*The SuperDisk Diskette is only supported
by Windows
98 or Mac OS 8.1 or later.
For other operating systems, you should
use Floppy Disk.
TO PC Terminal
USB Cable (supplied)
USB Terminal
Connection
Note
1
2
3
POWER Switch
SD4090.p45-66.p65 99/11/11, 16:4048