Filter
Top Products
36
For assistance, call 1-800-272-7033.
Light Metering
1Press or to select LIGHT METER
and press
or to select one of the
two settings shown below.
• Default setting is AUTO.
AUTO (No indication) :
Ideal for normal capturing, the
focus is set to the center portion
of the finder and the entire image
is metered.
: A small sphere in the center
portion of the finder is metered.
This mode is useful for capturing
back lit conditions, such as when
the subject is brightly lit.
2Press MENU to exit.
• Selected mode will appear on the
LCD Viewfinder. (See page 11.)
According to the recording condition and
purpose, set light metering to measure
exposure time.
REC
OFF
PLAY
PC
MANUAL
REC
VOL+
VOL
-
-
+
Set the POWER Switch to MANUAL
REC. (See pages 19~20.)
Before you begin
<MANUAL REC MENU 2/3>
WHITE BALANCE
LIGHT METER
SLOW SHUTTER
TIME LAPSE
CLOCK SET
SEL : SET :
EXIT : MENU
AUTO
AUTO
OFF
OFF
2
1
SD4090.p34-44.p65 99/11/11, 16:3936