Panasonic SDR-H40P/PC Camcorder User Manual


 
108
LSQT1337
With other products
With a PC
Problem Check points
The sound does not play
back properly when a
DVD disc that has been
copied using the DVD
burner is played back.
When the scenes recorded on an SD card by setting
[AUDIO REC] to [MPEG] are copied to a DVD disc using
the DVD burner and then played back with any other
devices, sound may not play back properly.
In this case, record scenes by setting [AUDIO REC] to
[DOLBY] and then copy to the disc. Or use the software
supplied with this unit to copy the scenes.
Problem Check points
When connected by the
USB cable, this unit is not
detected by the PC.
Close the menu screen before connecting the USB cable.
Select another USB terminal on the PC.
Check the operating environment. (l 85)
Disconnect the USB cable, turn the unit off then on and
then reconnect the USB cable.
When the USB cable is
disconnected, an error
message will appear on
the PC.
To disconnect the USB cable safely, double-click the
( ) icon in the task tray and follow the instructions on the
screen.
The DVD COPY function
will not start even when I
press the DVD COPY
button.
To create DVD-Video discs using the DVD COPY function,
you need to install VideoCam Suite from the supplied CD-
ROM to your PC. (l 88)
I cannot copy motion
pictures using the DVD
COPY function.
Once motion pictures have been copied using the DVD
COPY function, they cannot be copied a second or
subsequent time.
Import the motion pictures onto the PC, and then write them
on the DVD disc.
It takes a long time to
create a DVD.
Creating a DVD may take some time even if the size of the
motion picture files are small.
The DVD player cannot
play back the discs I have
created using VideoCam
Suite.
To playback a DVD disc created using VideoCam Suite, the
player must support playback of that DVD disc. (Refer to
the operating instructions of the player.)
SDR-H60&41&40P&PC&PL-LSQT1337_mst.book 108 ページ 2007年11月12日 月曜日 午後1時46分