Filter
Top Products
36
LSQT1337
∫ Screen indications
A Recording mode
B Selected recording destination
C Remaining time left for recording
When the remaining time is less than
1 minute, [R 0h00m] flashes red.
D Recording time elapsed
Each time the unit enters the recording
pause mode, the counter display will be reset
to “0h00m00s”.
≥ While motion picture recording is in progress,
the recording will not stop even if the LCD
monitor is closed.
≥ While motion picture recording is in progress,
do not disconnect the AC adaptor or remove
the battery. If you do, a repair message may be
displayed when the power is turned back on.
(l 100, About recovery)
[SD]
This mode switches the method for recording
audio to an SD card.
¬Select [SD CARD] in
[MEDIA SELECT].
Select the menu. (l 28)
[DOLBY] (Dolby AC-3):
This is a recording method suitable for copying
motion pictures recorded on an SD card to a
DVD disc by connecting the unit to a DVD
burner.
[MPEG] (MPEG-1 Audio Layer 2):
This is a recording method suitable for playing
back audio using a device conforming to the SD-
Video standard.
≥ This unit is not capable of converting the audio
recording method after recording motion
pictures.
By using the supplied software, audio can be
recorded in [DOLBY] mode on a disc and in
[MPEG] mode on an SD card.
≥ This function’s default setting is [DOLBY].
R 12h45m
R 12h45m
R 12h45m
0h00m10s
0h00m10s
0h00m10s
B
A
C
D
SP
Audio recording modes
[SETUP] # [AUDIO REC] # [DOLBY] or
[MPEG]
SDR-H60&41&40P&PC&PL-LSQT1337_mst.book 36 ページ ２００７年１１月１２日 月曜日 午後１時４６分